7558-xxx
Remove the two screws (A) securing the plastic media guide to the machine.
3.
Push the plastic media guide slightly toward the rear and pull it out from the machine.
4.
Release the hooks securing the sensor (TTM tray 3 feedout) to the machine.
5.
Disconnect the cable (B).
6.
Sensor (TTM tray 4 feedout) removal
Remove the TTM tray 4 media feeder. See
1.
2.
Disconnect the cable (A).
Service Manual
4-274
"TTM tray 4 media feeder removal" on page
Previous
Next
Go Back
4-291.