Stacker Media Bin Assembly Removal; Stapler Unit Assembly Removal - Lexmark X95x series Service Manual

Stacker media bin assembly removal

Release the two hooks securing the stacker media bin assembly (A) to the finisher.
1.
Lift the stacker media bin assembly (A) upward.
2.
3. Remove the stacker media bin assembly. (A).

Stapler unit assembly removal

Remove the finisher front door assembly. See
1.
Remove the staple cartridge.
2.
3. Remove the rear upper cover. See
Remove the rear lower cover. See
4.
Remove the stapler unit frame. See
5.
A
"Rear upper cover removal" on page
"Upper media bin front cover removal" on page
"Stapler unit frame removal" on page
"Finisher front door assembly removal" on page
7558-xxx
4-345.
4-377.
4-420.
4-409.
Repair information
4-407
Previous
Next
Go Back