Lubrication Specifications - Lexmark X95x series Service Manual

Hide thumbs Also See for X95x series:

Table of Contents

Lexmark X950, X952, X954

ADF feedout roller

ADF exit roller assembly

ADF transport roll assembly

Lubrication specifications

Lubricate only when parts are replaced or as needed, not on a scheduled basis. Use of lubricants other than

those specified can cause premature failure. Some unauthorized lubricants may chemically attack

polycarbonate parts. Use IBM no. 10 oil, P/N 1280443 (Approved equivalents: Mobil DTE27, Shell Tellus 100,

Fuchs Renolin MR30), IBM no. 23 grease (Approved equivalent Shell Darina 1), and grease, P/N 99A0394 to

lubricate appropriate areas. Use Nyogel type 774 to lubricate the Fuser Drive Assembly and Nyogel 744 to

lubricate the ITU and Cartridge Drive assemblies.

EVERY SERVICE

Water or alcohol

Preventive maintenance