Upper Pinch Guide Assembly Removal - Lexmark X95x series Service Manual

Move the upper media exit roll assembly frontward and outward in the direction of the arrow.
17.
F
E
D
Rear
Remove the upper media exit roll assembly (F).
18.
Note: When removing the upper media exit roll assembly (F), do not touch the rubber surface.
Reinstallation notes:
Maker sure the flat spot of the upper media exit roll assembly (F) is installed to the rear.
•
• When replacing the upper media exit roll assembly (F), do not touch the rubber surface.

Upper pinch guide assembly removal

1. Open the finisher front door assembly.
Remove the rear upper cover. See
2.
3. Remove the drive motor (buffer/transport). See
transport) removal" on page
Remove the three screws securing the hinge of the upper pinch guide assembly (A) on the rear of the
4.
finisher.
Move the upper pinch guide assembly hinge from the rear of the finisher.
5.
Remove the upper pinch guide assembly (A) from the inside of the finisher in the direction of the arrow.
6.
A
Rear
E-clip
Front
"Rear upper cover removal" on page
"Stepper motor (buffer/transport) and belt (buffer/
4-411.
Front
7558-xxx
F
E
4-377.
A
Repair information
Previous
Next
Go Back
4-423