Pull the plastic gate (D), and move it to its lowest position.
c.
Move the appropriate wiper in and out to clean the printhead.
•
Developer housing (Y) removal
Remove the printer front door. See
1.
Remove the transfer belt cleaner. See
2.
Remove the waste toner box.
3.
Remove the four photoconductor units.
4.
5.
Remove the four toner supplies.
Remove the operator panel left cover. See
6.
Remove the operator panel right cover. See
7.
D
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel left cover removal" on page
"Operator panel right cover removal" on page
7558-xxx
4-13.
4-178.
4-10.
4-11.
Repair information
4-67
Previous
Next
Go Back