Lexmark X95x series Service Manual page 540

7558-xxx
If the developer housing is installed correctly, the bracket (C) can be mounted over the developer housing
without difficulty. If the developer housing does not seem to install easily, do not force the part into the machine.
Ensure that the printhead retract lever is in the uppermost position, and try to slide it in again.
Reinstallation notes:Re-installation notes:
To complete the re-installation, do the following:
•
Be sure to attach the lower part of the auger properly to reduce toner spillage.
a.
Move the lever clockwise.
b.
Service Manual
4-66
C
Previous
Next
Go Back