Sensor (Compiler Media Present) Removal; Sensor (Diverter Gate) Removal - Lexmark X95x series Service Manual

Sensor (compiler media present) removal

Remove the finisher front door assembly. See
1.
2. Remove the rear upper cover. See
Remove the rear lower cover. See
3.
Remove the upper media bin assembly. See
4.
Remove the upper media bin vertical cover. See
5.
Remove the stapler unit frame. See
6.
7. Remove the clamp drive motor.
Remove the media eject unit assembly. See
8.
Remove the media eject motor assembly. See
9.
Remove the media compiler unit assembly. See
10.
page 4-362.
Disconnect the connector from the sensor (compiler media present) (A).
11.
12. Release the hooks securing the sensor (compiler media present) (A) to the compiler unit assembly (B).
Move the compiler media present actuator (C) downward as shown.
13.
14. Remove the sensor (compiler media present) (A).

Sensor (diverter gate) removal

Open the finisher front door assembly.
1.
Remove the rear upper cover. See
2.
3. Remove the upper media bin assembly. See
Remove the top cover. See
4.
Remove the left lower cover. See
5.
Remove the left upper cover. See
6.
Remove the punch carriage assembly. See
7.
"Rear upper cover removal" on page
"Upper media bin front cover removal" on page
"Upper media bin assembly removal" on page
"Stapler unit frame removal" on page
See"Clamp drive motor removal" on page
"Media eject unit assembly removal" on page
Connector
C
"Rear upper cover removal" on page
"Upper media bin assembly removal" on page
"Top cover removal" on page
"Left lower cover removal" on page
"Left upper cover removal" on page
"Punch carriage assembly removal" on page
"Finisher front door assembly removal" on page
"Right eject cover removal" on page
"Media eject motor assembly removal" on page
"Media compiler unit assembly removal" on
B
A
B
4-418.
4-356.
4-357.
7558-xxx
4-345.
4-377.
4-420.
4-419.
4-378.
4-409.
4-337.
4-367.
4-366.
4-377.
4-419.
4-372.
Repair information
4-387
Previous
Next
Go Back