Lexmark X95x series Service Manual page 530

7558-xxx
Remove the operator panel front cover. See
8.
9. Remove the printhead retract door. See
Remove the inner cover. See
10.
11. Remove the inner plate. See
Remove the ATC sensor PCB bracket. See
12.
Remove the waste toner auger chute. See
13.
Lift the appropriate plastic gate, and push it in to reduce toner spillage.
14.
Detach the lower portion (A) of the auger from the appropriate developer housing.
15.
Service Manual
4-56
"Operator panel front cover (MFP) removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
"Inner plate removal" on page
"ATC sensor PCB bracket removal" on page
"Waste toner auger chute removal" on page
A
4-145.
4-4.
4-98.
4-8.
Previous
4-29.
4-191.
Next
Go Back