Low Setting; Mid Setting - Panasonic AJ-SPX800P Operating Instructions Manual

8-3-4 LOW SETTING

Items/ Adjustable
Data Saved Range
MASTER –3dB Select the master gain from –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27, or 30dB.
GAIN :
0dB
:
S C U F E 30dB
H.DTL LEVEL 00 Set H.DTL LEVEL.
:
17
:
S C U F E 63
V.DTL LEVEL 00 Set V.DTL LEVEL.
:
24
:
S C U F E 31
DTL CORING 00 Set DTL CORING.
:
02
:
S C U F E 15
H.DTL FREQ. 00 Set a frequency (DTL width) at which H.DTL
is added. The greater the value, the higher
:
20
the frequency (the narrower the DTL).
:
S C U F E
31
LEVEL 0 Set LEVEL DEPEND.
No DTL is added to the portion whose
DEPEND. 1
brightness is the setting value or less.
:
5
When the GAMMA MODE SEL item is set to
STD, each setting value represents
brightness levels, as follows: 0 = about 0%,
1 = about 4%, 2 = about 8%, 3 = about 12%,
4 = about 16%, 5 = about 20%.
S C U F E
MASTER 0.35 Set MASTER GAMMA in 0.01 steps.
GAMMA :
0.45
:
S C U F E 0.75
BLACK –3 Set the gamma curb for dark spots.
STRETCH :
OFF
:
S C U F E +3
MATRIX OFF Select the color correction table.
TABLE A
B
S C U F E
COLOR ON Set the color correction to ON or OFF.
CORRECT OFF
S C U F E
<Note>
The items indicated by are the setting items for PAINT MENU
SW( ) R/W in the <SD CARD R/W SELECT> screen. The items
without are the setting items for PAINT MENU LEVEL R/W.
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information.

8-3-5 MID SETTING

Remarks
GAIN
H.DTL LEVEL
V.DTL LEVEL
DTL CORING
H.DTL FREQ.
LEVEL
DEPEND.
MASTER
GAMMA
BLACK
STRETCH
TABLE
CORRECT
The ____ in the Adjustable Range column indicates the preset
mode.
Items/ Adjustable
Data Saved Range
MASTER –3dB Select the master gain from –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27, or 30dB.
:
9dB
:
S C U F E 30dB
00 Set H.DTL LEVEL.
:
14
:
S C U F E 63
00 Set V.DTL LEVEL.
:
20
:
S C U F E 31
00 Set DTL CORING.
:
03
:
S C U F E 15
00 Set a frequency (DTL width) at which H.DTL
is added. The greater the value, the higher
:
20
the frequency (the narrower the DTL).
:
S C U F E
31
0 Set LEVEL DEPEND.
No DTL is added to the portion whose
1
brightness is the setting value or less.
:
5
When the GAMMA MODE SEL item is set to
STD, each setting value represents
brightness levels, as follows: 0 = about 0%,
1 = about 4%, 2 = about 8%, 3 = about 12%,
4 = about 16%, 5 = about 20%.
S C U F E
0.35 Set MASTER GAMMA in 0.01 steps.
:
0.45
:
S C U F E 0.75
–3 Set the gamma curb for dark spots.
:
OFF
:
S C U F E +3
MATRIX OFF Select the color correction table.
A
B
S C U F E
COLOR ON Set the color correction to ON or OFF.
OFF
S C U F E
Remarks
105
8