Table of Contents
Advertisement
Mounting the Ink Tanks
IV.2
Follow the procedure described below to mount the four ink tanks (C, M, Y, K) and the solution tank.
IV.2.1
Attach the ink tubes to the ink tanks.
(1) Remove the cap from the tip of each of the ink tubes protruding from the printer.
(2) Attach an ink tank to each of the tubes, making sure that the color of the sticker affixed to the ink
tank matches the color of the ring on the ink tube. The tube without a colored ring is the tube for
the cleaning solution. Attach the solution tank to this tube.
IV.2.2
Mount the ink tanks and the solution tank in the printer.
Mounting the Waste Ink Tanks
IV.3
Follow the procedure described below to mount the two waste ink tanks.
IV.3.1
Attach the waste ink tank mounting brackets to the printer.
Using the screws provided, attach one bracket to the left side and one to the right side of the
printer.
SignJet JS310 Series Set Up Guide
Ring
Sticker
- 22 -
Advertisement
Table of Contents
