Table of Contents
Advertisement
SignJet JS310 Series Set Up Guide
(1) Write down the printhead mounting position and the serial number.
These will be required for a later procedure.
CAUTION: Do not touch the surface of the printhead nozzles.
Inlet side
Outlet side
Serial number
(2) Attach an outlet tube and tube clamper (provided as accessories) to the printhead.
Leave the tube clamper open.
(3) Remove the cap attached to the printhead, and then insert the inlet tube into the printhead inlet.
Be sure that the tubes are tightly connected to the print heads.
K
Y
M
C
CAUTION :Do not mistake the color of tubes.
- 36 -
Advertisement
Table of Contents
