Vii.7 Adjusting The Positions Of Printheads Of The Same Color - GRAPHTEC SignJet JS310 Series Setup Manual

Adjusting the Positions of Printheads of the Same Color
VII.7
Here we will describe the adjustment procedure for the cyan printheads. Perform the same procedure for
the magenta, yellow, and black printheads.
VII.7.1 Select the print mode.
(1) Press the ONLINE key on the control panel to put the printer into ONLINE status.
(2) On the menu bar, click File → Print Setup.
(3) Make the following settings:
Insert a check in the box in front of "Color C" (Cyan).
Remove the checks from the boxes in front of the other three colors (Color M (Magenta),
Color Y (Yellow), and Color K (Black)).
Select "Test Mode" for "Print Mode".
Remove the check from the box in front of "BiDirection".
(4) Click "OK".
SignJet JS310 Series Set Up Guide
- 61 -