GRAPHTEC SignJet JS310 Series Setup Manual page 21

CAUTION: The printer weighs approximately 18ES/270 kg、25ES/330 kg. There is a risk
CAUTION: When raising the printer off the base used to hold it in place, make sure that
IV.1.5 Move the printer.
Unlock the casters, and then move the printer to its installation location.
If the installation location is on a different level or if there is a steep slope leading up to it, use a forklift
or crane to move the printer.
CAUTION: The printer weighs approximately 18ES/270 kg、 25ES/330 kg. There is a risk of
IV.1.6 Lock the casters.
SignJet JS310 Series Set Up Guide
of lower back injury to the person(s) attempting to lift the printer. Use a forklift
to move the printer.
the printer's weight is evenly balanced.
lower back injury to the person(s) attempting to lift the printer. Use a forklift or
crane to move the printer if the installation location is on a different level or if
there is a steep slope leading up to it.
- 20 -
Align the direction of the wheels with the
rectangular holes before raising the
printer.
Lock the casters.