GRAPHTEC SignJet JS310 Series Setup Manual page 6

Do not disassemble or modify the printer.
Such actions may result in electric shock or a fire hazard due to current leakage.
The interior parts of the printer contain high-voltage components.
Contact your sales representative or nearest Graphtec vendor for repairs.
Do not install the printer in the vicinity of volatile solvents such as thinner or
benzine.
A volatile solvent coming into contact with any of the internal electrical components may result in a fire
hazard or electric shock.
Do not use the printer in a dusty or humid location.
Such locations may cause electric shock or a fire hazard due to current leakage.
Do not use the printer in a location where it will be exposed to wind or rain, or in
any locations that are near water.
Such locations may cause electric shock or a fire hazard due to current leakage.
Do not touch the printing panel or printhead carriage while the printhead carriage
is moving.
Such action may result in injury.
When the printer is online, keep your hair, hands, etc. away from the printing panel
and the printhead carriage.
These parts may start to move when data is received, and cause injuries.
Do not disassemble or modify the printer.
Such actions may result in electric shock or a fire hazard due to current leakage.
The interior parts of the printer contain high-voltage components.
Contact your sales representative or nearest Graphtec vendor for repairs.
Do not install the printer in the vicinity of volatile solvents such as thinner or
benzine.
A volatile solvent coming into contact with any of the internal electrical components may result in a fire
hazard or electric shock.
Do not use the printer in a dusty or humid location.
Such locations may cause electric shock or a fire hazard due to current leakage.
Note to people wearing a cardiac pacemaker
This printer emits faint magnetic waves. If you are wearing a cardiac pacemaker and notice any
discomfort, please move away from the printer and consult your doctor.
If foreign matter or water enters the printer, turn off the power supply.
Use of the printer in such a condition may result in electric shock or a fire hazard due to current
leakage.
Unplug the power cable, and consult your sales representative or nearest Graphtec vendor.
SignJet JS310 Series Set Up Guide
WARNING
- 5 -