GRAPHTEC SignJet JS310 Series Setup Manual page 34

V.2.2 Move the printhead carriage to the cleaning position.
(1) From the main menu, select [Cleaning Tool] and then press the ENTER key.
(2) From the submenu, select [Clean Post] and then press the ENTER key.
(3) The printhead carriage will move to the cleaning position and then stop.
V.2.3 Pour approximately 150 cc of cleaning solution into the solution tank.
V.2.4 Set the Solution valve for the solution tank to the supply position.
V.2.5 Set the 3-way valve for each ink tank to the cleaning position.
Ink-solution 3-way valve (4 valves)
Turn to the cleaning position
SignJet JS310 Series Set Up Guide
- 33 -
Solution valve
Turn to the supply position