Table of Contents
Advertisement
Fixing the printhead carriage
IX.2
Covering the printhead by the wet keeping frame and the fresh keeping polyethylene film following the
procedures that are described at "VIII.3 Moisturizing of print head", then fixing with some adhesion tape
to resist movement.
Discard the waste ink
IX.3
IX.3.1
Remove the tubes from the waste ink tanks.
IX.3.2
Take out the waste ink tanks from the printer.
IX.3.3
Displace the waste ink to the plastic bottle that you provided
CAUTION: Do not mix the waste ink with any other chemicals and solvent when you displace the
IX.3.4
Replace the waste ink tanks, and connect the tubes.
SignJet JS310 Series Set Up Guide
waste ink. Also dispose the waste ink as the industrial waste (waste oil).
- 76 -
Advertisement
Table of Contents
Need help?
Do you have a question about the SignJet JS310 Series and is the answer not in the manual?
Questions and answers