GRAPHTEC SignJet JS310 Series Setup Manual page 46

(2) Turn the knob to the red arrow blow to fix firmly.
(3) Set the media flange to the other side of media roll likewise.
Note: Please note that you stop using the media flanges when the media may be bended beneath
the burden of its weight and then may be wrinkled up after setting media flanges to the
heavy media roll.
VI.1.3 Feed the media a distance of approximately 1 m.
Use the following procedure to feed the media a distance of approximately 1 m.
(1) Set the rotation direction switch on the media feeding system.
Inside wound media: [
SignJet JS310 Series Set Up Guide
] direction
- 45 -
Outside wound media: [ ] direction