Table of Contents
Advertisement
IV.1.3
Remove the printer fastenings.
IV.1.4
Move the printer off the base used to hold it in place.
Use a forklift to raise the printer off the base.
CAUTION: Before raising the printer, align the direction of the wheels with the direction of
SignJet JS310 Series Set Up Guide
the rectangular holes. If they are not aligned, the wheels will catch on the
edges of the holes when the printer is raised.
- 19 -
Printer fastenings (8 locations)
Insert the forklift prongs here.
Advertisement
Table of Contents
Need help?
Do you have a question about the SignJet JS310 Series and is the answer not in the manual?
Questions and answers