Table of Contents
Advertisement
(5) Adjust the position of the vertical lines printed on the return pass.
To shift the lines to the left: Increase the setting value.
To shift the lines to the right: Decrease the setting value.
(6) Adjust the Bi-direction Compensation of Important Setup menu to align the printed bands.
VII.10.4
Print the adjustment pattern once again and check the results of the adjustments made.
Repeat the printing and adjustment procedures until the vertical lines printed on the outward
and return passes form continuous straight lines.
VII.10.5
Make adjustments in the same way for the magenta, yellow and black printheads.
Attaching the Printhead Carriage Cover
VII.11
Attach the printhead carriage cover.
SignJet JS310 Series Set Up Guide
- 72 -
Printhead Carriage Cover
Advertisement
Table of Contents
Need help?
Do you have a question about the SignJet JS310 Series and is the answer not in the manual?
Questions and answers