Connection With A Computer; Connection Method - Riso EZ5 Series User Manual

REG-ML_EN.book Page 13 Wednesday, September 21, 2011 5:19 PM

Connection with a Computer

You can directly send data from a connected computer to the machine as an original for printing. Because digital data
itself is used for making a master, the finish of prints becomes outstanding.

Connection Method

One-to-one connection with a
Windows PC
• Cable:
USB cable
3m (10 feet) Hi-Speed USB
Important!:
• Before making the USB connections,
turn on both the machine and computer,
and wait until the initial screen is
displayed.
• The maximum allowable voltage for
USB connector input and output is 5 V.
• For the USB connections, use a
commercially available USB cable (that
conforms to the USB 2.0 standard).
Network connections
• Cable:
Ethernet cable
Shielded cable that supports 10BASE-T
or 100BASE-TX
Important!:
• Before making the Ethernet
connections, turn off both the machine
and computer.
Note:
• The RISO Network Card (Option) is
required.
• If the optional network interface card
"RISO Network Card" is installed, the
machine can be connected with a
Macintosh computer. For details, see
the User's Guide of RISO Network Card.
Before Starting to Use
USB port on the machine
USB
port
USB port on
your computer
Connection with a Computer
13