Power Connection - Riso comcolor gd series User Manual

Power Connection

WARNING
■ Use this unit with the rated voltage. Use a
power source with a sufficient margin.
Otherwise, a fire or an electric shock might
occur.
■ Install the unit near the wall socket to
avoid using an extension cord between
the unit and the wall socket. If an
extension cord is absolutely required, do not
use longer than 5m (15ft).
Otherwise, a fire or an electric shock might
occur.
■ Do not damage or rebuild the power
cord. Placing a heavy object on the cord
or pulling or forcibly bending the cord
may damage the cord, resulting in a fire or an
electric shock.
■ The power cord supplied with this product can
be used only for this unit. Do not use it for
another electric product.
Otherwise, a fire or an electric shock might
occur.
■ Do not plug or unplug the power cord if your
hands are wet. Otherwise, an electric shock
might occur.
6
CAUTION
■ Connect the plug securely to the optional
connection outlet on the printer main unit to
avoid a loose connection.
■ Do not pull the power cord when unplugging it.
Otherwise, it could become damaged and a fire
or an electric shock might occur. Be sure to
hold on to the plug when unplugging the power
cord.
■ If the unit will not be used for a long time, such
as during a holiday, unplug the power cord
from the electrical outlet for safety.
■ Pull out the power plug from the electrical
outlet at least once a year and clean the prongs
of the plug and their surroundings.
Dust collected on these areas can result in fire.
Wrapping Envelope Finisher User's Guide