Position The System; Position Polycom Realpresence Group Systems - Polycom realpresence group series Administrator's Manual

Charge the remote control battery
Ref.
Number Description
1 Pull the battery out of the end of the remote control.
2 Insert the USB plug of the battery into a USB 2.0 port.
3 Wait until the status light on the battery turns green.
4 Insert the charged battery into the remote control.

Position the System

Polycom RealPresence Group systems can accommodate being set up in a variety of ways. This section
describes placement for your RealPresence Group system, RealPresence Touch, Polycom Touch Control,
TM
EagleEye Acoustic camera, and EagleEye Director automatic camera positioning system.

Position Polycom RealPresence Group Systems

RealPresence Group systems are designed to be placed on tabletops or in equipment racks. If the system
or any accessories are installed in an enclosed space, such as a cabinet, ensure that the air temperature in
the enclosure does not exceed 40°C (104° F). You might need to provide forced cooling to keep the
equipment within the operating temperature range.
Caution: Allow ventilation
Keep ventilation openings free of any obstructions.
To position the system:
1 Do one of the following:
Polycom, Inc.
Introducing the Polycom RealPresence Group Series Systems
21