Customize The Local Interface Home Screen; Display Speed Dial Entries - Polycom realpresence group series Administrator's Manual

images receive high resolution images from the RealPresence Group system, while
simultaneously far-end systems displaying low resolution images receive low resolution
images from the RealPresence Group system.
 Centralized Conferencing Control Protocol (CCCP) enables seamless participation in
multipoint video conferences hosted on Lync's audio/video server.
 Microsoft Lync AVMCU Spotlight feature enables the system to display only the broadcaster's
video when a participant is made the broadcaster in a call.
 RealPresence Group systems support Forward Error Correction (FEC) DV0 and DV1 in Lync
2013, Skype for Business Server 2015, and Skype for Business 2015 client environments for
both H.264 SVC and RTV endpoints. The scheme introduces recovery packets on the
transmitter which recover lost video packets on the receiver. Enabling or disabling the Lost
Packet Recovery feature in the web interface does not affect the negotiation of FEC.
 IPv6 is supported in Lync 2013, Skype for Business Server 2015, and Skype for Business
2015 client environments with IPv6 networks.
To activate system options:
1 In the web interface, go to Admin Settings > General Settings > Options.
2 Click Launch Polycom Support to Get a Key Code.
3 Register for an account, or log in to Polycom Support with your email address and password.
After you successfully log in, your request is sent to an account representative.
4 When you receive your new key code, enter it at Key and click Save.
For information about integrating with Skype for Business Server 2015 or Microsoft Lync Server 2013, refer
to the Polycom Unified Communications Deployment Guide for Microsoft Environments at
support.polycom.com.

Customize the Local Interface Home Screen

Use the Polycom RealPresence Group system web interface to configure how information is displayed on
the Home screen of the local interface.
Note: Home screen when paired
Home screen customizations have no effect when the RealPresence Group system is paired with a
Polycom Touch Control.
To configure the Home screen using the web interface:
1 In your web browser address line, enter the RealPresence Group system's IP address.
2 Go to Admin Settings > General Settings > Home Screen Settings.
3 Configure the settings on the Home Screen Settings page that are described in the following
sections.

Display Speed Dial Entries

You use speed dialing to quickly call an IP address designated as a Favorite.
Polycom, Inc.
Introducing the Polycom RealPresence Group Series Systems
35