Polycom Eagleeye Director Indicator Light; Eagleeye Producer Indicator Lights - Polycom realpresence group series Administrator's Manual

Indicator Light
Steady blue light
Blinking blue light
Steady amber light
Steady green light

Polycom EagleEye Director Indicator Light

The following figure shows the location of the power indicator light on the back of the Polycom EagleEye
Director.
This indicator light provides the following information.
Indicator Light
Steady green light
Steady red light
Blinking red light
Blinking blue light

EagleEye Producer Indicator Lights

A light-emitting diode (LED) is integrated into the front of the EagleEye Producer unit. Different LED lights
refer to different system states. These allow you to identify the current system state for the EagleEye
Producer system. Detailed LED and system states mappings are shown in the following table.
LED
Blue
Blinking Blue
Fast Blinking Blue
Amber
Polycom, Inc.
Introducing the Polycom RealPresence Group Series Systems
System Status
System is on and awake.
Camera firmware is being updated.
System is asleep.
System is in a call.
Status
Cameras are ready; camera tracking is off
Cameras are powering on
Factory restore on the cameras is starting
Camera tracking is on
System State
Power On, EagleEye Producer Normal State
On, Not in a Call, Receive IR
EagleEye Producer Boot Up
Calibrate Webcam Room View
Standby - Asleep
29