Place And Answer Calls; Configure Call Settings - Polycom realpresence group series Administrator's Manual

Place and Answer Calls

Before you start using the system, configure your system and call settings. System Settings screens provide
access to high-level options for the entire system. For convenience, some of the User Settings options are
repeated on these screens.
To get started with calling, see these topics:
●

Configure Call Settings

●
Multipoint Calling
●
Manage Directories in the Web Interface
●
Use the Web Interface Place a Call Page
●
Stop and Start Camera Video in a Call
●
Place Calls in Kiosk Mode
Configure Call Settings
The call settings screen allows you to determine which settings are available to users when they place and
answer calls in both the web interface and the local interface.
To configure call settings:
1 In the web interface, go to Admin Settings > General Settings > System Settings > Call
Settings.
2 Configure the settings in the following table and save your changes.
Polycom, Inc. 113