Configure Lan Properties; Configure Ip Address (Ipv4) Settings; Configure Ip Address (Ipv6) Settings - Polycom realpresence group series Administrator's Manual

Configure LAN Properties

You can configure LAN properties for the RealPresence Group systems and for Polycom Touch Control
devices. Refer to the following section and
To configure RealPresence Group System LAN properties:
» Do one of the following:
 In the local interface, go to Settings > Administration > LAN Properties.
 In the web interface, go to Admin Settings > Network > LAN Properties.

Configure IP Address (IPv4) Settings

Configure the following IP Address (IPv4) settings on the LAN Properties screen.
Setting
IP Address
Your IP Address is
Subnet Mask
Default Gateway

Configure IP Address (IPv6) Settings

Configure the following IP Address (IPv6) settings on the LAN Properties screen.
Setting
Enable IPv6
IP Address
Enable SLAAC
Polycom, Inc.
Configure the Polycom Touch Control LAN
Description
Specifies how the system obtains an IP address.
• Obtain IP address automatically—Select if the system gets an IP address from a
DHCP server on the LAN.
• Enter IP address manually—Select if the IP address will not be assigned
automatically.
If the system obtains its IP address automatically, this area displays the IP address
currently assigned to the system.
If you selected Enter IP address manually, enter the IP address here.
Displays the subnet mask currently assigned to the system.
If the system does not automatically obtain a subnet mask, enter one here.
Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP address, enter one here.
Description
Enables the IPv6 network stack and makes the IPv6 settings available.
Specifies how the system obtains an IP address.
• Obtain IP address automatically—Select if the system gets an IP address from a
SLAAC or a DHCP server on the LAN.
• Enter IP address manually—Select if the IP address will not be assigned
automatically.
Specifies whether to use stateless address autoconfiguration (SLAAC) instead of DHCP
to automatically obtain an IP address.
Using DHCP to get the IP address requires a DHCP server to get the address from the
network, but with SLAAC, existing routers help the system get the IP address from the
network.
Networks
Properties.
41