Configure Polycom Touch Control Regional Settings - Polycom realpresence group series Administrator's Manual

Setting Description
Time Server Specifies whether the connection to a time server is automatic or manual for system time
settings. You can also select Off to enter the date and time yourself.
Primary Time Specifies the address of the primary time server to use when Time Server is set to Manual.
Server Address
Secondary Time Specifies the address of the time server to use when the Primary Time Server Address
Server Address does not respond. This is an optional field.
Current Date and •
Current Time
•
3 In the web interface, go to Admin Settings > General Settings > Date and Time > Time in Call.
4 Configure these settings.
Setting
Show Time in Call
When to Show
Show Countdown
Before Next Meeting

Configure Polycom Touch Control Regional Settings

To configure the Polycom Touch Control regional settings:
1 From the Home screen touch
2 Touch the Location tab.
3 Select a language from the Language menu.
4 Configure the following settings under Date and Time.
Polycom, Inc.
If the Time Server is set to Manual or Auto, these settings are not displayed.
If the Time Server is set to Off, these settings are configurable.
Description
Specifies the time display in a call:
• Elapsed Time—Displays the amount of time in the call.
• System Time—Displays the system time on the screen during a call.
• Off—Time is not displayed.
Specifies when the time should be shown:
• Start of the call only—Displays only when the call begins.
• Entire call—Displays continuously throughout the call.
• Once per hour—Displays at the beginning of the hour for one minute.
• Twice per hour—Displays at the beginning of the hour and midway through the hour
for one minute.
This setting is displayed only when the calendaring service has been enabled.
When enabled, it displays a timer that counts down to the next scheduled meeting 10
minutes before that meeting. If a timer is already showing, the countdown timer replaces it
10 minutes before the next scheduled meeting.
Administration.
Control and Navigation
185