Monitors And Cameras; Experience High-Definition Video Conferencing; Send Video In High Definition; Receive And Display Video In High Definition - Polycom realpresence group series Administrator's Manual

Monitors and Cameras

These topics detail high-definition video conferencing, how to set up monitors and cameras with your
system, and how to record calls:
●

Experience High-Definition Video Conferencing

●
Configure Monitor Settings
●
Record and Live Stream Calls
●
Polycom Cameras
●
Connect Cameras to RealPresence Group Systems
●
Power Cameras with RealPresence Group Systems
●
Configure Video Input Settings
●
Enable Camera Presets
Experience High-Definition Video Conferencing
Polycom RealPresence Group systems offer the following high-definition (HD) capabilities:
● Send people or content video to the far site in HD
● Receive and display video from the far site in HD
● Display near-site video in HD
● Full-motion HD

Send Video in High Definition

Polycom RealPresence Group systems with HD capability can send video in wide-screen, HD format. For
information about frame rates for content, refer to Content.
To send video in HD format, use any model of Polycom camera that supports HD video and a Polycom
RealPresence Group system capable of sending 720p or better video.

Receive and Display Video in High Definition

When the far site sends HD video, Polycom RealPresence Group systems with HD capability and an HD
monitor can display the video in wide-screen, HD format. The HD 720 format supported by these systems
is 1280 x 720, progressive scan format (720p). Polycom RealPresence Group systems with 1080 capability
can receive 1080p progressive format and can display 1080p progressive or 1080i interlaced format.
Near-site video is displayed in HD format when you use an HD video source and an HD monitor. However,
near-site video is displayed in SD if the system is in an SD or lower-resolution call.
Polycom, Inc. 64