Configure Sleep Settings - Polycom realpresence group series Administrator's Manual

Setting
Time Zone
Time Server
Time Server Address
Time Format

Configure Sleep Settings

To configure when the system goes to sleep:
1 In the web interface, click Admin Settings > Audio/Video > Sleep > Sleep.
2 Select the number of minutes the system can be idle before it goes to sleep.
Polycom, Inc.
Description
Specifies the time difference between GMT (Greenwich Mean Time) and your location.
Specifies connection to a time server for automatic Touch Control time settings.
The date and time must be manually reset every time the Touch Control restarts, in the
following cases:
• Time Server is set to Off.
• Time Server is set to Manual or Auto, but the Touch Control cannot connect to a time
server successfully.
Specifies the address of the time server to use when Time Server is set to Manual.
Specifies your format preference for the time display and lets you enter your local time.
Control and Navigation
186