Change Maximum Security Profile Default Values; Other Restrictions When Using The Maximum Security Profile - Polycom realpresence group series Administrator's Manual

Admin Settings Area
SNMP
Calendaring Service
Diagnostics Area
System
System Log Settings
Enable Remote Logging
Remote Log Server Transport Protocol

Change Maximum Security Profile Default Values

When you configure the RealPresence Group system to use the Maximum Security Profile, the system forces you to
change the following settings from their default values:
● Admin account User Id
● User account User Id
● Admin room password
● Admin remote access password
● User room password
● User remote access password

Other Restrictions when Using the Maximum Security Profile

The following settings are not available in the "User Settings" menu (they are configurable only in their
respective sections of the Admin Settings):
● Camera > Allow Other Participants in a Call to Control Your Camera
● Meetings > Mute Auto Answer Calls
● Meetings > Auto Answer Point-to-Point Video
Polycom, Inc.
Version1
Version2c
Version3
Enable Calendaring
Service
Maximum
Range Default Value
Checkbox Disabled
Checkbox Disabled
Checkbox Enabled
Checkbox Disabled
Maximum
Range
Checkbox
UDP
TCP
TLS
Security Profile Default Settings
Configurable?
Yes
Yes
Yes
Yes
Default
Value Configurable?
Disabled Yes
TLS Yes
246