Indicator Light
Blinking amber light
Blinking red light
Steady blue light
Blinking blue light
Steady amber light
Alternating blue and amber lights
Fast blinking amber light
Steady green light
Polycom Touch Control Indicator Light
When the Polycom Touch Control is on, the
Polycom EagleEye Acoustic Camera Indicator Lights
The following figure shows the location of the LED on the front of the EagleEye Acoustic camera.
EagleEye Acoustic indicator lights
Ref.
Number
Description
1
IR Sensor
2
System Status
The system status light provides the following information.
Polycom, Inc.
Introducing the Polycom RealPresence Group Series Systems
System Status
In a POST sequence, at least one test has resulted in a warning error. The
system continues to blink amber but initializes after the sequence is
complete if no severe errors occur.
In a POST sequence, at least one test has resulted in a severe error. The
system continues to blink red and will not start up.
System is initializing.
System is awake.
System received an IR (infrared) signal.
System is receiving a call.
System is asleep.
System is in software update mode.
System is in factory restore mode.
System is shutting down.
System is in a call.
Home button is lit.
28