Customize The Realpresence Touch Home Screen; Choose Icon Buttons That Display On The Realpresence Touch Home Screen - Polycom realpresence group series Administrator's Manual

To unpair the Polycom Touch Control and Polycom RealPresence Group using the web
interface:
1 Go to Admin Settings > General Settings > Pairing > Polycom Touch Control.
2 Disable Allow Pairing or select Forget this Device.
The RealPresence Group system cannot pair with any Polycom Touch Control while Allow Pairing is
disabled.

Customize the RealPresence Touch Home Screen

You can use the RealPresence Group system web interface to configure how information is displayed on
the Home screen of the RealPresence Touch device. These settings are included in the RealPresence
Group System settings profile, and included in bundled provisioning when using RealPresence Resource
Manager.
To configure the RealPresence Touch Home Screen using the web interface:
1 In the web interface, go to Admin Settings > General Settings > Pairing > RealPresence Touch
Home Screen Configuration.
2 Configure the settings on the Home Screen Settings page that are described in the following
sections.
Note: Enable Recent Calls and Speed Dial icons in the web interface
To enable the Recent Calls and Speed Dial icons, do the following:
• Recent Calls: Go to Admin Settings > General Settings > System Settings > Recent Calls.
Select the Enable Recent Calls checkbox.
• Speed Dial: Go to Admin Settings > General Settings > Home Screen Settings > Speed Dial.
Select the Enable Speed Dial checkbox.
Choose Icon Buttons That Display on the RealPresence Touch Home
Screen
By default, two icon buttons appear in the lower center of the RealPresence Touch Home screen; users see
only the Place a Call and Show Content icons. However, you can customize the number of screens and
Home screen icons in a preferred order. Once you customize the Home screen configuration, users can
scroll through one to three Home Screens, with up to three icons on each screen.
To display the Home screen icons:
1 In the web user interface, go to Admin Settings > General Settings > Pairing > RealPresence
Touch Home Screen Configuration.
2 Under Configure Home Screen, click Configure Home Screen Options.
3 At Home screen 1 > Button 1, select one to three icon buttons to appear per screen in your preferred
order. You can select from the following icon buttons:
 None (no icon)
 Place a Call
 Show Content
Polycom, Inc.
Control and Navigation
179