Polycom realpresence group series Administrator's Manual page 95

Setting
Ringtone
User Alert Tones
Audio Mute auto-answered
Calls
Enable MusicMode
Enable Keyboard Noise
Reduction and
™
NoiseBlock
Transmission Audio Gain
(dB)
Enable Audio Mute
Reminder
Enable Join and Leave
Tones
Enable Acoustic Fence
Acoustic Fence Sensitivity
Polycom, Inc.
Description
Specifies the ring tone used for incoming calls.
Specifies the tone used for user alerts.
Specifies whether to mute incoming calls. Incoming calls are muted until you press
the Mute button on the microphone or on the remote control.
Note: You must first enable Auto Answer Point-to-Point Video or Auto Answer
Multipoint Video. These settings are in Admin Settings > General Settings >
System Settings > Call Settings. For details on these settings, see
Settings.
Specifies whether the system transmits audio using a configuration that best
reproduces interactive and live performance music picked up by microphones. This
mode provides the highest possible bandwidth for audio.
When MusicMode is enabled, even the faintest musical notes come through clearly.
Note: Automatic noise suppression and automatic gain control are disabled when
MusicMode is enabled.
Specifies whether the system mutes audio from the RealPresence Group Series
microphones when keyboard tapping sounds or other extraneous noises are
detected, but no one is talking. NoiseBlock unmutes the system when speech is
detected, regardless of the existence of background noise.
Note: MusicMode is disabled when this setting is enabled. If an external echo
canceller is used, keyboard noise reduction is not available.
Specifies the audio level, in decibels, at which to transmit sound. Unless otherwise
advised, Polycom suggests setting this value to 0 dB.
Specifies whether to display a notification as a reminder to unmute the
RealPresence Group system microphone when speaking is detected.
Plays an audible tone when a participant in a multipoint call joins or leaves the call.
Note: This setting is available only when the multipoint option is installed.
Specifies whether Acoustic Fence can be used or not. For details on Acoustic
Fence, refer to Acoustic Fence
Specifies the microphone sensitivity for Acoustic Fence Technology. You can set a
value between 0 and 10, where 0 is the minimum sensitivity and 10 is the maximum
sensitivity. Higher settings increase the radius of the fence area around the primary
microphone.
Technology.
Microphones and Speakers
Configure Call
95