Polycom realpresence group series Administrator's Manual page 27

Ref.
Number Description
1 LED indicator light
2 Power sensor
The following figure identifies the features on the front of the RealPresence Group 700 system.
Ref.
Number Description
1 LED indicator light
2 Power sensor
3 Status display area
4 USB 2.0 port
5 Restore button
Use the USB port for any USB 2.0 device.
Note: Maximum Security Profile status display area
If your RealPresence Group 700 systems operates with the Maximum Security Profile, the status
display area does not display the software version or IP address.
Brief status and diagnostic messages are displayed in the status display area of the RealPresence Group
700 system. The LED on the front of all RealPresence Group systems provides the following information.
Indicator Light
Off
Blinking blue light
Polycom, Inc.
Introducing the Polycom RealPresence Group Series Systems
System Status
System is powered off.
In a POST sequence, no errors are occurring and tests are successful. The
system continues to blink blue and initializes after the sequence is complete
if no severe errors occur.
27