Configure Sip Settings For Integration With Microsoft Servers - Polycom realpresence group series Administrator's Manual

Setting
Registrar Server
Proxy Server
Registrar Server Type
For more information about this and other Microsoft interoperability considerations, refer to the Polycom
Unified Communications for Microsoft Environments Deployment Guide at support.polycom.com.

Configure SIP Settings for Integration with Microsoft Servers

Integration with Microsoft servers allows Skype for Business 2015, Lync 2013, and Polycom RealPresence
Group system users to place audio and video calls to each other.
Note: Presence server limit
Because Polycom RealPresence Group systems run in dynamic management mode, they cannot be
simultaneously registered with Skype for Business Server 2015/Microsoft Lync Server 2013 and the
presence service provided by the Polycom RealPresence Resource Manager system. RealPresence
Group systems can obtain presence services from only one source: Skype for Business Server 2015,
Lync Server 2013, or the presence service provided by the RealPresence Resource Manager system.
Polycom supports the following features in Skype for Business 2015 and Microsoft Lync Server 2013:
● Interactive Connectivity Establishment (ICE)
● Centralized Conferencing Control Protocol (CCCP); this feature is available only with the optional
Skype for Business Interoperability License key
● Federated presence
● The Microsoft real-time video (RTV) codec; this feature is available only with the optional Skype for
Business Interoperability License key
Polycom, Inc.
Description
Specifies the IP address or DNS name of the SIP Registrar Server. The address can be
specified as either an IP address or a DNS fully qualified domain name (FQDN). If
registering a remote RealPresence Group System with an Edge Server, use the FQDN
of the edge server.
By default for TCP, the SIP signaling is sent to port 5060 on the registrar server. By
default for TLS, the SIP signaling is sent to port 5061 on the registrar server.
Enter the address and port using the following format:
<IP_Address>:<Port>
<IP_Address> can be an IPv4 or IPv6 address, or a DNS FQDN such as
servername.company.com:6050.
Syntax Examples:
• To use the default port for the protocol you have selected:
10.11.12.13
• To specify a different TCP or UDP port:
10.11.12.13:5071
Specifies the DNS FQDN or IP address of the SIP Proxy Server. If you leave this field
blank, the address of the Registrar Server is used. If you leave both the SIP Registrar
Server and Proxy Server fields blank, no Proxy Server is used.
By default for TCP, the SIP signaling is sent to port 5060 on the proxy server. By default
for TLS, the SIP signaling is sent to port 5061 on the proxy server.
The syntax used for this field is the same as for the Registrar Server field.
Specifies the registrar server type. Select Microsoft or Unknown.
Networks
51