Set Up Your System Hardware; Recharge The Remote Control Battery - Polycom realpresence group series Administrator's Manual

Polycom RealPresence Group 700 system
Powerful video processing and several input and output options make it ideal for rooms with complex
requirements, such as multiple displays, cameras, and content sources. The intuitive interface that comes
standard on all RealPresence Group products makes it easy for even novice users to control the system
and get the most out of their video collaboration experience with no hassles.

Set Up Your System Hardware

This manual provides information to supplement the setup sheets provided with your system and its optional
components. A printed copy of the system setup sheet is provided with each RealPresence Group system.
PDF versions of the system setup sheets are available at support.polycom.com.

Recharge the Remote Control Battery

Your system setup sheet shows how to charge the battery in the remote control the first time. When the
remote control battery power is at 10% or less, a notification is displayed on the home screen. The low
battery notification returns after you dismiss other notifications, and is not displayed while the system is in
a call.
To recharge the remote control battery:
1 Pull the battery out of the end of the remote control.
2 Insert the USB plug into any USB 2.0 port, such as the one on your system. The RealPresence
Group 300, RealPresence Group 310, and RealPresence Group 500 systems have two USB 2.0
ports on the back of the systems, while the RealPresence Group 700 system has one USB 2.0 port
on the front.
3 While the battery is charging, the status light is orange. After the status light on the battery turns
green, remove it from the port.
4 Insert the charged battery into the remote control.
Note: Recharging time
Recharging the battery might take anywhere from 20 minutes to several hours.
Polycom, Inc.
Introducing the Polycom RealPresence Group Series Systems
20