Position The Realpresence Touch Device - Polycom realpresence group series Administrator's Manual

 If you plan to place the system on a table or open shelf, attach the self-adhesive feet to the bottom
of the system.
 If you plan to mount a RealPresence Group 700 system in an equipment rack, install the mounting
brackets, as shown in the following figure.
Mount the RealPresence Group 700 system
Note: Mounting bracket differences
Polycom RealPresence Group 300, 310, and 500 systems use a different type of mounting bracket.
For more information, refer to
2 Place the system in the desired location, keeping in mind the following pointers:
 Position the system so that the camera does not face toward a window or other source of bright
light.
 Leave enough space to connect the cables easily.
 Place the camera and display together so that people at your site face the camera when they are
looking at the display.

Position the RealPresence Touch Device

Polycom RealPresence Group systems can be controlled by the Polycom RealPresence Touch device.
Ensure that the RealPresence Touch is conveniently located for use during a meeting, such as on a
conference table. Place the device in a location where you can easily touch the screen and see the room
system monitor displays. The RealPresence Touch device can be positioned horizontally at either a 30
degree or 65 degree viewing angle.
Polycom, Inc.
Introducing the Polycom RealPresence Group Series Systems
support.polycom.com or contact your Polycom distributor.
22