Play A Videotape Or Dvd; Connect Computers To Polycom Realpresence Group Systems; Configure Content Sharing - Polycom realpresence group series Administrator's Manual

Play a Videotape or DVD

The DVD inputs are active when you select the camera source configured as DVD. This means that both
the audio and video inputs are active—you cannot select one or the other. Because the microphone inputs
remain active while the DVD player is playing, call participants might want to mute the microphones while
playing DVDs.
To configure DVD audio settings for playing a DVD on a RealPresence Group 310, 500, and
700 system:
1 In the web interface, go to Admin Settings > Audio/Video > Audio > Audio Input.
2 Set Line In Level for playback volume of the DVD player relative to other audio from the system.
Enable DVD Audio Out Always On unless you have the DVD inputs and outputs both connected to
the same device to play and record.
Connect Computers to Polycom RealPresence Group
Systems
You can connect a computer directly to a RealPresence Group system. When you do this, other call
participants can see everything that you see on your computer.
When you connect to video and audio from your computer, the audio is muted unless the computer is
selected as a video source.
For more information about connecting computers as content video sources for RealPresence Group
systems, refer to Configure Video Input

Configure Content Sharing

You can configure content sharing on the web interface.
Note: Recommended Monitor 2 output resolution settings
For content to display properly, the RealPresence Group system Monitor 2 must support Progressive
mode, and the output resolution should be set to a Progressive setting, such as 1280x720p or
1920x1080p. Interlaced output for Monitor 2 is not supported. Do not use the resolution setting
1920x1080i.
To configure the content display:
1 In the web interface, go to Admin Settings > Audio/Video > Video Inputs and select the input you
want to configure for content.
Polycom, Inc.
Settings. Refer to your system setup sheet for connection details.
Content
103