The Print Result Is Not What Was Expected - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

The Print Result is Not What was Expected

If the print result is not what was expected, identify the symptom in the following table to
perform the remedy.
Symptom
Cannot print in
color.
The 2-sided
printing is not
available.
The document is
printed on a
different paper
size than
specified.
The image on the
document edges
is missing on the
output.
The printed font
differs from the
font specified on
the computer.
Printing is slow.
The specified
print options are
not enabled.
The document
edges are missing
on the printout.
The output color
differs between
Secure Print and
Print Stored File.
The print color
differs from
before.
Black lines are
printed.
Cause
[Output Color] is set to [Black
and White].
The print page buffer is
insufficient.
The document size is different
from the paper size loaded in
the specified tray.
The image is larger than the
printable area.
Font replacement is set on
the print driver.
[High Resolution] is selected
for [Image Quality].
The print driver for another
model is used.
The required optional kit is
not installed on the machine.
The image is larger than the
printable area.
This is because the print path
is different. The output color
of Print Stored File is
reproduced by the presence
or absence of dots, as with
copying or faxing. On the
other hand, the output color
of Secure Print is reproduced
using density by default, as
with printing.
The color calibration is
incorrect.
A print driver for another
machine is used.
Trouble during Printing
Remedy
Set [Output Color] to [Auto Detect] or [Color].
Try the followings:
Set [Image Quality] to [Standard] using the
print driver
Set the port that is not used to [Disable]
Change the size of paper in the tray, or
change the print option to specify a tray that
contains the correct sized paper.
Expand the printable area of the machine, or
reduce the image size on the printout.
Check the font replacement table.
When image data, such as photos, is printed
with the high resolution, the print speed
becomes slow. Select [Standard] for [Image
Quality].
Install the print driver for the model.
Check the optional components installed on
the machine, and set [Installable Options]
under [Configuration] in the print driver
again.
Expand the printable area of the machine, or
reduce the image size on the printout.
To closer match the color of Secure Print and
files in folder, select [On] in [Image Options]
> [Print Page Mode] on the [Advanced] tab of
the print driver settings.
Execute auto calibration.
Refer to "Executing Calibration" (P.74).
Install the print driver for your machine.
14
399