Configuration Of Store To Usb; Step 1 Available Usb Memory Devices; Step 2 Centreware Internet Services Setting Items - Fuji Xerox ApeosPort-V C3320 Administrator's Manual

Hide thumbs Also See for ApeosPort-V C3320:

Table of Contents

Configuration of Store to USB

This section describes how to configure the machine to use the Store to USB service.

The following shows the reference section for each procedure.

Step 1 Available USB Memory Devices

The Store to USB service allows you to directly save the scanned data to a USB 2.0 memory

device which is inserted into the USB memory slot on the control panel of the machine.

USB 2.0 memory devices

USB memory devices with the capacity of up to 128 GB

USB memory devices that support FAT12, FAT16, FAT32, or VFAT (long name)

• USB memory devices that are encrypted with software cannot be used with the machine.

Step 2 CentreWare Internet Services Setting Items

You can enable/disable the Store to USB service using CentreWare Internet Services. When

you disable the service, the Store to USB button is not displayed on the Services Home

screen, and you cannot use the service.

The Store to USB service is set to enabled by factory default.

For details on the setting items, click [Help] at the upper right corner of CentreWare Internet Services screen to see help.

Important • To display the online help for CentreWare Internet Services, users need to have the environment to

For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.282).

connect to the Internet. The communication fee shall be borne by you.

Table of Contents

Docuprint cm415 ap