14 Problem Solving
4
Insert the Tray 2 into the machine, and push
until it stops.
Important • Do not use excessive force on the tray. Doing
Paper Jams in Fusing Unit
The following describes how to clear paper jams occurring in the fusing unit.
Important • Ensure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt,
1
Open the Tray 5 (bypass) and remove the
remaining paper on the tray.
2
Grasp both sides of the Tray 5 (bypass), and
then pull the tray from the machine.
3
Pull out the Tray 1 halfway from the machine
until it stops.
14
514
so could damage the tray or the inside of the
machine.
or oil from your hands on the film of the belt unit may reduce print quality.
• Protect the drums of the drum cartridges against bright light. If the rear cover remains open for
more than 3 minutes, print quality may deteriorate.