Parameter
Item No.
Paper size
102
Paper tray
103
Coordinate
104
rotation
Color mode
105
Extended Settings
Parameter
Item No.
Auto layout
106
Active palette
107
No. of prints
108
2 sided printing
110
Sets the default paper size. Only available when [Paper tray] is set to [Auto] or
[Tray 5]. Only cut sheet can be set.
[4] (Default)
: A4
[5]
: A5
[15]
: B5
[99]
: Auto
[101] (Default) : A Size
Important • When Tray 1 or 2 is selected, [Paper size] cannot be set. The paper size
loaded in the specified tray is displayed.
Note
• If [A Size] or [Auto] is selected, the settings become as follows:
- When [Document size] is set to other than [Auto], [Paper size] is set to
[A4].
- When Tray 1 or 2 is selected, the paper size is determined by the size of
paper loaded in the tray, and thus [Paper size] cannot be set.
- Depending on the combination of [Document size] and [Paper size], [?]
may be displayed for the magnification. In this case, the document is
printed at a scale of 100%.
Sets the paper tray to be used for printing.
[0] (Default)
: Auto
[1]
: Tray 1
[2]
: Tray 2
[5]
: Tray 5
Important • When Tray 1 or 2 is selected, the paper size is determined by the size of
paper loaded in the tray, and thus [Paper size] cannot be set.
Note
• When [Auto] is selected and paper of the same size in the trays is loaded,
paper will be fed in the order of Tray 1
Sets the paper orientation for printing.
[0] (Default)
: 0 degree
[1]
: 90 degree
Sets the color mode.
[0]
: Color
[1] (Default)
: Grayscale
[2]
: Black pen
Selects whether to perform auto layout of the document or not.
[0] (Default)
: ON
[1]
: OFF
Selects whether to use a pen specified by command or set on the panel.
[0] (Default)
: Command
[1]
: Panel
Sets the number of copy to be printed.
[1] - [250] (Default: 1) : 1 - 250
Sets 2 sided printing.
[0] (Default) : None
[1]
: Head to head
[2]
: Head to toe
HP-GL/2 Emulation
Value
Tray 2.
Value
15
559