Fuji Xerox ApeosPort-V C3320 Administrator's Manual page 436

14 Problem Solving
Error Code
016-747 [Cause]
[Remedy] Take one of the following measures:
016-748 [Cause]
[Remedy] Reduce the number of print pages by dividing the print data or by printing one copy at
016-749 [Cause]
[Remedy] For 1), use the machine's print driver for printing. If the error still is not resolved, contact
Note
016-750 [Cause]
[Remedy] Check whether you are correctly using the application (such as ContentsBridge) and
Note
016-751 [Cause]
14
[Remedy] For 1), use the print driver to print the document.
For more information on the memory, refer to "Allocate Memory" (P.191).
016-752
[Cause]
[Remedy] Change the [Image Quality] setting from [High Resolution] to [High Quality], or from
436
Cause and Remedy
The memory became insufficient when using the Repeat Image feature and the
Annotations features simultaneously.
Increase the annotation image size.
Reduce the usage of Repeat Image.
Unable to print because of insufficient hard disk space.
a time when printing multiple copies.
Probable causes are as follows:
For a print job:
1) The printer language received from the print driver is unsupported by this machine.
For printing of a document received by Internet Fax:
2) The printer language of the document received from the remote machine is
unsupported by this machine.
our Customer Support Center.
For 2), request the sender to send Internet fax documents using a printer language
supported by the machine.
• An optional component must be installed for some printer languages such as PostScript. For more
information, contact our Customer Support Center.
The machine received a printing job ticket with a PDF, an XPS from an application (such
as ContentsBridge) that allows direct transmissions of files, but the printing job ticket
data had a grammar or print instruction unsupported by the machine.
whether the print instruction was correct.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application.
If the error still is not resolved, have the Configuration Report, the Job History Report,
and the print data with the printing job ticket ready, and contact our Customer Support
Center.
• XPS stands for XML Paper Specification.
Probable causes are as follows:
1)During the PDF Bridge processing, a syntax or parameter error occurred, an undefined
command was used, and a PDF file was damaged.
2)When [Print Processing Mode [408])] for the PDF Direct Print feature has been set to
[PS([1])], memory is insufficient.
3)When [Print Processing Mode [408])] for the PDF Direct Print feature has been set to
[PS([1])], a PDF file including OpenType fonts is processed.
For 2), take one of the following measures:
Use the print driver to print the document.
Increase PostScript memory.
For 3), create a PDF file in which OpenType fonts are not included.
Unable to process for PDF Bridge because of insufficient memory space.
[High Quality] to [Standard]. Or, add memory.