Fuji Xerox ApeosPort-V C3320 Administrator's Manual page 445

Error Code
018-409 [Cause] The IPv6 address already exists in the network of Ethernet2.
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-410 [Cause] Updating of the IPv4 address and host name for the DNS server failed on the network
of Ethernet2.
[Remedy] Check whether the IP address of the DNS server is set correctly.
018-411 [Cause] Updating of the IPv6 address and host name for the DNS server failed on the network
of Ethernet2.
[Remedy] Check whether the IP address of the DNS server is set correctly.
018-412 [Cause] The IPv6 address already exists in the network of Ethernet2.
018-413
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-414
[Cause] IP address for IPv6 set manually in Ethernet2 is incorrect.
[Remedy] Set the IP address correctly.
018-415 [Cause] IP address for IPv6 set manually in Ethernet2 is incorrect.
[Remedy] Change the [Manually Configured IPv6 Address] on the machine, or the IP address of
IPv6 on the network device, to remove the duplication of addresses.
018-416 [Cause] The IPv6 address already exists in the network of Ethernet2.
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-500
[Cause] The certificate does not exist in the authentication server.
[Remedy] Configure the server certificate. Or, cancel authentication.
018-501 [Cause] Communications with the CA server set in the machine failed.
[Remedy] Check the network connection and the address of the CA server.
018-502 [Cause] The machine failed to transfer data using SMB of the Scan to PC service because
computers allowed to login are restricted.
[Remedy] Confirm the property information for the specified user, and check whether the
computers allowed to login to the server are restricted.
018-503 [Cause] Communications with the CA server set in the machine failed.
018-504
[Remedy] Execute the authentication operation again.
Cause and Remedy
Error Code
14
445