Fuji Xerox ApeosPort-V C3320 Administrator's Manual page 397

Symptom
The copy has a The document enlargement
stripe pattern. ratio is too large.
The copy is The document is not loaded
misaligned or correctly.
skewed.
The document guides on the
document feeder are not set
in the correct positions.
The paper tray is not inserted
correctly.
The paper guides in Tray 5
are not set in the correct
positions.
Unable to copy in [Output Color] is set to [Black
color. & White].
The document The document is larger than
edges are missing the printable area.
on the copy.
Cause
Vertical stripes may be printed on the copies
depending on the ratio. Adjust the ratio to
eliminate the stripes.
Refer to "3 Copy" > "Copy" > "Reduce/Enlarge (Making
Enlarged/Reduced Copies)" in the User Guide.
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
Load the document correctly, and align the
document guides to the document.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
Firmly push in the tray until it stops to set it
properly.
Refer to "Loading Paper" (P.43).
Load the paper correctly, and align the paper
guides to the paper edges.
Refer to "Loading Paper in Tray 5 (Bypass Tray)" (P.45).
Set [Output Color] to [Auto Detect] or [Color].
Refer to "3 Copy" > "Copy" > "Output Color (Selecting
the Color for Copying)" in the User Guide.
Adjust [Reduce/Enlarge] to copy the
document smaller.
Trouble during Copying
Remedy
397
14