Table of Contents
Advertisement
Note
• To link a folder with a job flow sheet created with [Create Job Flow Sheet], start from [Send from
Features that can be registered are listed below.
Forward to (FTP, SMB, e-mail, fax, and Internet fax)
Print
Depending on the method of storing in the folder, there are restrictions on the combination
of features.
Output
Input
Fax Documents for
Secure Polling
Scanning
Fax to Folder
Internet Fax
Received
Print Stored
O
:
Available
X
:
Not available
:
Available depending on the System Administration mode settings
*1 : Load an A4 document in landscape orientation when TIFF-S has been selected for the Internet fax forwarding profile.
Loading the document in portrait orientation will reduce the size of the Internet fax image.
*2 : If the fax USB cable is disconnected while a received fax file in a folder is being printed, the file is not deleted after printing,
even if the delete after printing setting is enabled in the folder settings.
Restrictions on Using Job Flow
A job flow can be used by single or multiple users, or can be used by linking to a specific
folder. The Authentication feature restricts the use of the job flows.
For information on the available Job Flow features and restrictions on use, refer to "Authentication for Job Flow Sheets and
Folders" (P.369).
1
Select [Create Job Flow Sheet].
2
Carry out the job flow operation in accordance
with your purpose.
Folder] or [Create Folder]. For more information, refer to "6 Send from Folder" in the User Guide and
"Create Folder" (P.236).
Print
Fax
O
O
O
O
*2
O
O
O
O
X
X
Internet
Mail
FTP
*1
Fax
O
O
O
O
O
O
O
O
O
O
X
X
X
Setup
SMB
O
O
O
O
5
X
239
Advertisement
Chapters
Table of Contents
