Setup Of Device Driver (Normally Installed In Server; Network Driver - NEC Express5800 User Manual

SETUP OF DEVICE DRIVER (NORMALLY INSTALLED IN
SERVER)
For the installation and setup of each optional device driver, refer to the documentation shipped with
the option.

Network Driver

The two network drivers of standard equipment are automatically installed.
However, the transfer rate and duplex mode of each network driver must be set.
When the system is Windows Server 2003 x64 Editions
[When PROSet is not installed]
1.
The [Local Area Connection Properties] dialog box appears.
* The procedure in the case of the standard start menu
1. Click Start menu, Click [Control Panel], Click [Network Connections], and Click
[Local Area Connection].
* The procedure in the case of the classic start menu
1. Click Start menu, Click [Settings] and Click [Network Connections].
The [Network Connections] dialog box appears.
2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.
2.
Click [Configure].
The property dialog box for network adapter appears.
3.
Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the value
specified for HUB.
4.
Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1.
Open the [Device Manager]
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link] and specify the [Speed & Duplex] value the same as the value specified
for HUB.
4.
Click [OK].
Installing the Operating System B-13