Windstream
3.5
SIP Trunking Service Configuration Guide
10-28-06 : SIP System Information Setup – IP Trunk Port Binding
Set this entry to 0 (Disable) to allow an incoming call to use the lowest port.
SIP Server Information Setup (Not Required)
All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 8 SIP Server Information Setup
10-29-01 : SIP Server Information Setup – Outbound Proxy
Enable (1) the SIP Outbound Proxy.
If entries are made in Program 10-29-xx for a SIP Server and the SIP Server is then removed
or not used, the entries in Program 10-29-xx must be set back to their default settings. Even
if 10-29-01 is set to .0. (off), the SV8100 will check the settings in the remaining 10-29
programs.
10-29-03 : SIP Server Information Setup – Default Proxy IP Address
Input the IP Address provided by the SIP service provider (e.g., 66.23.129.253).
Define the SIP Trunk Service Provider Proxy IP Address. You may resolve the IP address of
the Outbound Proxy by pinging the URL.
Issue 1.0
13