Table of Contents
Advertisement
9. Installer mode
There are two ways of programming the radio alarm station:
A: Via the keypad on the radio alarm station.
B: Via the software either locally or via the communications software.
The following describes how to program the radio alarm panel via the
keypad. To program the radio alarm panel via software, see the
software instructions.
The installer menu is graphically designed to be used almost intuitively.
You move within the installer menu by pressing the control buttons.
With the arrow keys, you navigate up and down within a menu item
according to the direction of the arrow. The buttons on the left and
right refer to the LCD display and have various functions.
10. Settings in installer mode
10.1 First steps in installer mode
In user mode, do the following:
Enter a valid installer code:
(Factory setting of installer code: 7890)
After entering the installer code, you have to enter an administrator
code. When delivered, the administrator code is 1234:
The radio alarm panel changes to installer mode and displays the
following text: "You are in installer mode".
With the control buttons
items in installer mode. For a list of the menu items, see the next page
(Table 1).
To select a menu item, press the control button
Select.
To exit a menu item, press the control button
Back.
To exit installer mode, press the control button
Exit.
17
7 8 9 0
1 2 3 4
you can now scroll through the menu
under the word
under the word
under the word
Advertisement
Table of Contents
