Abus SECVEST 868 Installation Instructions Manual page 95

11.4 Fitting the Ethernet module
Now insert the Ethernet module carefully and exactly into the base for
the module. Make sure that all base feet are correctly anchored in the
base holder.
Plug in the Ethernet cable.
Now read section 11.6 on the next page.
11.5. Fitting the GPRS module
Before inserting the GPRS module, place a SIM card in the module. You
can use any SIM card whose PIN code can be disabled or where the SIM
PIN has been changed to 0000 in advance. If you have not done so
already, first place the SIM card in a mobile phone and disable the PIN
query or change the SIM PIN to 0000. Then place the SIM card in the
GPRS module. Fix the antenna of the GPRS module by fitting it carefully
and exactly into the base for the module. Make sure that all base feet
are correctly anchored in the base holder.
Fir the antenna cable as shown and stick the antenna to the interior of
the casing.
95